Service manual

2 – 17

D ISASSEMBLY

2. DISASSEMBLY

Inverter + LED Board Removal

INVERTER + LED BOARD REMOVAL

Part A

Remove the Back Cover. (page 2-4)

Remove the I/O Bracket. (page 2-11)

Remove the Front Panel with the LCD Module. (Steps 1 & 2 of Part B of the LCD Module Removal Procedure, pages 2-14 & 2-15)

Part B

1. Separate the Front Panel from the rest of the system by removing 4 screws (A, B, C & D).

2. Separate the Inverter + LED Board from the Front Panel by removing 3 screws (E, F & G).

EMOVING THE INVERTER +

LED B

OARD

FIG. 2-16

Inverter + LED Board

Front Panel