Service manual

2 – 10

D ISASSEMBLY

2. DISASSEMBLY

INVERTER BOARD REMOVAL

Part A

Remove the Back Cover. (Page 2-4)

Part B

1. Remove the Inverter Shielding Plate by removing 3 screws (A, B & C) which secure it to the rest of the system.

(If you have already removed the FDD module, Screws A & B have already been removed during the process.)

2. Remove 2 screws (D & E) which secure the Inverter Board and the Inverter Mylar to the rest of the system.

3. Disconnect the following 3 cables:

(C1 & C2) The LCD to Inverter Board (2 cables from Connectors CN2).

(C3) The Inverter Board to System Board (from Connector CN1).

4. Separate the Inverter Board and the Inverter Mylar.

EMOVING THE INVERTER

BOARD

FIG. 2-11

Inverter Board Removal

Inverter Mylar

Inverter Shielding

Plate

Inverter Board

Inverter Shielding Plate

CN1

CN2

FDD Module