Service manual

CPU REMOVAL

Part A

Remove the Back Cover. (page 2-4)

Part B

FNote:

If you want to upgrade the CPU, replace the old CPU with the upgraded one and also see the CPU

Upgrade Notes on the next page.

1. Unplug the Fan Cable from Connector CN5.

2. Disengage both caches at the sides of the Fan from the CPU socket.

3. A thermal pad is attached to the Fan. Remove the Fan with the Thermal Pad from the CPU.

4. Disengage the CPU lever and remove the CPU.

FNote for Replacing the CPU: : Reverse the removal procedure. Please also note the following:

When inserting the CPU, put the CPU in the CPU socket with the notched corner of the CPU aligning with the notched

corner of the CPU socket and then engage the lever.

REMOVING THE FAN AND THE

CPU

IG. 2-3

CPU Removal

Fan

CPU

CN5

2 - 5