Operating instructions
Table Of Contents
- User's Manual
- Notice
- Contents
- Chapter 1: Introduction
- Chapter 2: Using The Computer
- Chapter 3: Advanced Controls
- Overview
- Advanced Video Controls
- Display Devices
- Display Options
- Enabling Other Displays
- Power Management Features
- Enabling Power Management/Options
- Chapter 4: Drivers & Utilities
- Chapter 5: BIOS Utilities
- Chapter 6: Upgrading The Computer
- Chapter 7: Troubleshooting
- Appendix A. Specifications
- Glossary
Troubleshooting
Display7-9
7
The screen is flickering.
possible cause: The vertical refresh rate is insufficient on your
external monitor.
solution: 1.Avoid using the Multiple display mode. Use
LCD only or CRT only.
2.Switch to a lower resolution and/or fewer
colors.
3.Adjust the refresh frequency in the display
controls (
“Attaching a Monitor (CRT)” on
page 3 - 8
).
The screen images aren’t clear.
possible cause: The viewing angle of the LCD is bad.
indicator: The screen appears shiny or too dim.
solution: Adjust the position of the LCD. LCDs are
designed to be viewed “straight on”. If the angle
is wrong, you may see glare from the screen’s
backlight.