Operating instructions
Table Of Contents
- User's Manual
- Notice
- Contents
- Chapter 1: Introduction
- Chapter 2: Using The Computer
- Chapter 3: Advanced Controls
- Overview
- Advanced Video Controls
- Display Devices
- Display Options
- Enabling Other Displays
- Power Management Features
- Enabling Power Management/Options
- Chapter 4: Drivers & Utilities
- Chapter 5: BIOS Utilities
- Chapter 6: Upgrading The Computer
- Chapter 7: Troubleshooting
- Appendix A. Specifications
- Glossary
Troubleshooting
7-8Display
7
Display
Nothing appears on screen.
possible cause: The system is in a power saving mode.
indicator: The power LED is blinking orange (Standby), or
is off (
Hibernate).
solution: Press the power button for less than 4 seconds. If
the computer does not turn on again then it was
most likely shut down, or has no power source.
Check the cables, outlets, power strips etc.
solution: The screen saver is activated.
solution: Press any key or move the mouse to return to
your display.