Operating instructions
Table Of Contents
- User's Manual
- Notice
- Contents
- Chapter 1: Introduction
- Chapter 2: Using The Computer
- Chapter 3: Advanced Controls
- Overview
- Advanced Video Controls
- Display Devices
- Display Options
- Enabling Other Displays
- Power Management Features
- Enabling Power Management/Options
- Chapter 4: Drivers & Utilities
- Chapter 5: BIOS Utilities
- Chapter 6: Upgrading The Computer
- Chapter 7: Troubleshooting
- Appendix A. Specifications
- Glossary
BIOS Utilities
5-16Power Menu
5
Power Menu
Power Loss Control (Power Menu)
Here you may set what happens to your machine after a loss of power
(e.g. due to a power cut). When power resumes the computer can ei-
ther stay off, power on, or return to the same power state it was in
when the power loss occurred (e.g. if the machine was off it will re-
main so, if it was on it will turn on again). In any case data which was
not saved prior to the power loss cannot be recovered. The default
setting is “Stay Off”.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
F1 Help Select Item -/+ Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
This is Power Loss
Control
Power
Power Loss Control [Stay Off]
Application Note
Some applications will
automatically save
data for you if they are
set up properly.
Figure 5 - 6
Power Menu