Operating instructions
Table Of Contents
- User's Manual
- Notice
- Contents
- Chapter 1: Introduction
- Chapter 2: Using The Computer
- Chapter 3: Advanced Controls
- Overview
- Advanced Video Controls
- Display Devices
- Display Options
- Enabling Other Displays
- Power Management Features
- Enabling Power Management/Options
- Chapter 4: Drivers & Utilities
- Chapter 5: BIOS Utilities
- Chapter 6: Upgrading The Computer
- Chapter 7: Troubleshooting
- Appendix A. Specifications
- Glossary
BIOS Utilities
Advanced Menu 5 - 11
5
Reset Configuration Data: (Advanced Menu)
If you want to clear the Extended System Configuration Data (ES-
CD) area then select ‘Yes’ here. The default setting is ‘No’ and you
will probably never need to change this. ESCD provides information
to the BIOS and OS for communicating with non-PnP plug-in devic-
es. When the computer starts the BIOS records in the ESCD infor-
mation about how older devices are to be configured.
Large Disk Access Mode: (Advanced Menu)
Select ‘Other’ if you are using systems such as Novell, UNIX etc. The
default setting ‘DOS’ is the default setting if you are using Windows.
Legacy USB Support: (Advanced Menu)
Choose “Enabled” if you intend to use USB devices in systems
which do not normally support USB functionality (e.g. DOS). The
default setting is “Disabled” and does not need to be changed if you
intend to use your USB devices in Windows.