Service manual

Disassembly
2 - 14 Removing the System Memory (RAM) - 2
2.Disassembly
Removing the System Memory (RAM) - 2
Memory Upgrade Process
1. Turn off the computer, and turn it over and remove the battery (page 2 - 5) and remove the keyboard (page 2 - 5).
2. Remove screws - and component bay cover .
3. Carefully disconnect CPU fan cables & , and remove screws - in the reverse order to that indicated on
the label (i.e. remove screw first, and lastly remove screw ) and carefully pull the tab to disconnect the heat
sink.
4. Carefully (it may be hot) lift up the heatsink off the computer.
Figure 9
RAM-2 Module
Removal
a. Remove screws and
component bay cover.
b. Disconnect the cables
and remove the screws.
c Remove the heatsink.

6. Component Bay
Cover
15. Heatsink
•11 Screws
1
5
6
7
8
9
14
9
14
15
a.
b.
c.
6
1 2
3
4 5
8
7
10
9
11
12
13
14
15