Service manual

Disassembly

Removing the Hard Disk Drive 2 - 9

2.Disassembly

Removing the Hard Disk(s) in the Secondary HDD Bay

1. Turn off the computer, and turn it over and remove the battery.

2. The secondary hard disk bay is located under the battery.

3. Remove screws - from the secondary hard disk assembly.

4. Grip the tab

and slide the hard disk assembly in the direction of the arrow .

5. Lift the hard disk assembly out of the compartment.

6. Remove the screws - to release the hard disk from the case .

7. Reverse the process to install any new hard disk(s).



7. Hard Disk Assembly

12. Hard Disk Case

13. Hard Disks

•8 Screws

Figure 5

Secondary HDD

Assembly Removal

a. Remove the battery.

b. Remove the screws and

slide the secondary hard

disk assembly in the di-

rection of the arrow.

c. Lift the secondary hard

disk assembly out off

the computer.

d. Remove the screws to

release the hard disk

from the case.