Service manual

Disassembly

2 - 8 Removing the Optical (CD/DVD) Device

2.Disassembly

Removing the Optical (CD/DVD) Device

1. Turn off the computer, and remove the battery (page 2 - 5).

2. Locate the RAM & CPU bay cover , and remove screws - .

3. Carefully (a fan and cable are attached to the under side of the cover) lift up the bay cover.

4. Carefully disconnect the fan cable , and remove the cover

5. Remove the screw at point , and use a screwdriver to carefully push out the optical device

at point .

6. Insert the new device and carefully slide it into the computer (the device only fits one way. DO NOT FORCE IT; The

screw holes should line up).

7. Restart the computer to allow it to automatically detect the new device.

Figure 4

Optical Device

Removal

a. Remove the screws.

b. Remove the cover.

c. Remove the screw and

push the optical device

out off the computer at

point 8.



1. Component Bay Cover

9. Optical Device

•5 Screws