Service manual

Disassembly
2 - 16 Removing the Bluetooth Module
2.Disassembly
Removing the Bluetooth Module
1. Turn off the computer, turn it over, and remove the battery (page 2 - 5) and the component bay cover (page 2 - 8).
2. The Bluetooth module will be visible at point on the mainboard (Figure 11a).
3. Remove screw (Figure 11b) and turn the module over (Figure 11c).
4. Carefully disconnect the cable and separate the connector (Figure 11c) from the Bluetooth Module.
5. Lift the Bluetooth Module (Figure 11d) up and off the computer.
Figure 11
Bluetooth Module
Removal
a. Locate the Bluetooth
module.
b. Remove the screw and
turn the module over.
c. Disconnect the cable
and the connector from
the Bluetooth module.
d. Lift the Bluetooth module
out.
1
2
3
4
5
c.
a.
4
1
5
2
3
b.
d.

5. Bluetooth Module
•1 Screw