Service manual

Disassembly

Removing and Installing a Processor 2 - 11

2.Disassembly

Removing and Installing a Processor

Processor Removal Procedure

1. Turn off the computer, turn it over, and remove the battery (page 2 - 5) and the component bay cover (page 2 - 8).

2. Locate the heat sink.

3. Loosen the CPU heat sink screws in the order

, & (the reverse order as indicated on the label Figure

6b).

4. Carefully lift up the heat sink (Figure 6c) off the computer.

Figure 6

Processor Removal

a. Locate the heat sink.

b. Remove the screws from

the CPU heatsink.

c. Remove the CPU heat

sink.



4. Heat Sink

•3 Screws