Service manual

Disassembly
Removing the Bottom Case 2 - 13
2.Disassembly
3. Turn the computer around and remove screws - (Figure 2 - 10) from the rear of the computer.
4. Remove screw and disconnect the touchpad cable , LCD cable , Inverter cable , Modem module (if
included) and speaker cable (Figure 2 - 11).
5. Carefully lift the LCD and top case assembly off the bottom case assembly .
1 2
Figure 2 - 10
Bottom Case
Removal
Sequence
(cont’d)
Remove the two
screws from the rear
of the computer.
21
1 2 3 4 5
6
7 8
2
4
3
5
1
6
a. b.
7
8
Figure 2 - 11
Bottom Case
Removal
Sequence
(cont’d)
a. Remove the screw
and the cables con-
nected to the main-
board.
b. Lift the LCD and top
case off the bottom

7. LCD & Top Case
8. Bottom Case
•6 Screws

7. LCD & Top Case
8. Bottom Case
•3 Screws