Service manual

Disassembly
Removing the CPU 2 - 11
2.Disassembly
4. Use a screwdriver to apply pressure at point (Figure 2 - 8a) in order to carefully slide the heat sink forward
slightly, and prise the unit upwards.
5. Release the fan cables from points - (Figure 2 - 8b), and remove the heat sink.
6. Unlock the processor by raising lever (Figure 2 - 8c) to the fully vertical position, and carefully lift the proces-
sor off the socket.
2
3 4
5
6
2
1
3
4
a.
b.
c.
5
6
d.
Figure 2 - 8
Processor
Removal
Sequence
(cont’d)
a. Slide the heat sink
forward slightly, and
prise the unit up-
wards.
b. Release the fan ca-
bles.
c. Unlock the CPU.
d. Remove the CPU.

1. Heat sink
6. CPU