Service manual

Disassembly
2 - 10 Removing the CPU
2.Disassembly
Removing the CPU
1. Turn OFF the computer and remove the battery (see page 2 - 5).
2. Remove the screws - (Figure 2 - 6), and remove the CPU cover .
3. Remove the five screws from the heat sink in order - as indicated (Figure 2 - 7).
Figure 2 - 6
Processor
Removal
Sequence
Remove the two
screws and the CPU
cover.
1 2 3
2
3
1
1 5
3
24
351

Caution
The heat sink, and
CPU area in general,
contains parts which
are subject to high
temperatures - Please
allow the area time to
cool before removing
these parts).

Reassembly Screw
Order
When inserting a new
or replacement CPU,
make sure you insert
the screws in the same
order indicated in Fig-
ure 2 - 7.

6. CPU cover
•10 Screws
Figure 2 - 7
Processor
Removal
Sequence
(cont’d)
Remove the five
screws from the
heat sink in the or-
der indicated.