Service manual

Disassembly
Removing the System Memory 2 - 9
2.Disassembly
Removing the System Memory
1. Remove the battery (see page 2 - 5) and keyboard (see page 2 - 8).
2. Remove screws - (Figure 2 - 5a) from the shielding plate , and lift the plate up off the computer.
3. Locate the memory sockets and (Figure 2 - 5c), and gently pull latches and (Figure 2 - 5c) on the
memory socket toward the sides of the computer as indicated in Figure 2 - 5c.
4. The module (Figure 2 - 5d) will pop-up, and you can remove it.
5. Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot.
Figure 2 - 5
Memory Removal
Sequence
a. Remove the screws
from the shielding
plate.
b. Remove the shield-
ing plate.
c. Pull the latch(es) on
the memory sockets
to release the mod-
ule(s).
d. When the module
pops up, lift it out.

1.Shielding plate
14.Memory module(s)
•8 Screws
2 9 1
10 11 12 13
14
5
c. d.
a.
2
8
6
1
b.
4
3
7
13
9
11
14
12
1312
10

Contact Warning
Be careful not to touch
the metal pins on the
module’s connecting
edge. Even the clean-
est hands have oils
which can attract parti-
cles, and degrade the
module’s perform-
ance.