Service manual

Disassembly
2 - 8 Removing the Keyboard
2.Disassembly
Removing the Keyboard
1. Turn OFF the computer and remove the battery (see page 2 - 5).
2. Press the three keyboard latches at the top of the keyboard to elevate the keyboard from its normal position as in
Figure 2 - 4a (you may need to use a small screwdriver to do this).
3. Carefully lift the keyboard up and out, being careful not to bend the keyboard ribbon cable (Figure 2 - 4b).
4. Disconnect the keyboard ribbon cable from the locking collar socket..
Figure 2 - 4
Keyboard
Removal
Sequence
a. Press the three
latches to release
the keyboard.
b. Lift the keyboard out
and disconnect the
cable from the lock-
ing collar.
4
a.
Keyboard Tabs
1 2 3
c.
b.
5
4
5
Re-Inserting the Key-
board
When re-inserting the
keyboard firstly align
the three keyboard
tabs (Figure 2 - 4c) at
the bottom of the key-
board with the slots in
the case.

5. Keyboard