Service manual

Disassembly
2 - 6 Removing the Hard Disk Drive Assembly
2.Disassembly
Removing the Hard Disk Drive Assembly
1. Turn the computer OFF and remove the battery (see page 2 - 5).
2. Remove screw (Figure 2 - 2a).
3. Slide the HDD assembly in the direction of the arrow (Figure 2 - 2c), then lift it up out of the computer.
4. Remove screws - (Figure 2 - 2e) from the assembly, and separate the hard disk from the case.
Figure 2 - 2
Hard Disk
Removal
Sequence
a. Remove the HDD
cover screw.
b. Remove the cover.
c. Slide the HDD as-
sembly in the direc-
tion of the arrow.
d. Lift the HDD assem-
bly out of the com-
puter.
e. Remove the screws
and separate the
HDD from the case.
1
2 5
a. b.
d.
1
2
5
3
4
6
7
c.
1
e.

6. HDD case
7. HDD
•5 Screws