User Guide

Disassembly
Removing the Inverter 2 - 27
2.Disassembly
Removing the Inverter
1. Remove the battery (page 2 - 7), bay one device (page 2 - 8), hard disk assembly (page 2 - 9), bay two device (page
2 - 10), keyboard (page 2 - 11), shielding plate (page 2 - 12), CPU (page 2 - 13), palm rest (page 2 - 17) and bottom
case (page 2 - 18).
2. Remove the rubber covers and screws - from the LCD (Figure 2 - 25a).
3. Run your finger around the middle of the frame to carefully unsnap the LCD front panel module from the back
(Figure 2 - 25b).
4. Remove screw from the inverter, lift to disconnect cables & from the rear of the inverter (Figure 2 - 25c).
5. Remove the inverter off the LCD assembly (Figure 2 - 25d).
Figure 2 - 25
LCD Removal
Sequence
a. Remove the screws.
b. Unsnap the LCD
front panel from the
back.
c. Remove the screw
from the inverter.
d. Disconnect the ca-
bles and remove the
inverter.
1 6
7
8 9
10
11
2
1
4
3
5
6
a. b.
7
8
9
10
11
c.
d.

7. LCD Front Panel
11. Inverter
•7 Screws