User Guide

Disassembly
2 - 26 Removing the LED Board
2.Disassembly
Removing the LED Board
1. Remove the battery (page 2 - 7), bay one device (page 2 - 8), hard disk assembly (page 2 - 9), bay two device (page
2 - 10), keyboard (page 2 - 11), shielding plate (page 2 - 12), CPU (page 2 - 13), palm rest (page 2 - 17) and bottom
case (page 2 - 18).
2. Turn the top case assembly over and remove screws - from the LED board (Figure 2 - 23a).
3. Lift the LED board off the top case assembly (Figure 2 - 23b).
Removing the Speakers
1. Remove the battery (page 2 - 7), bay one device (page 2 - 8), hard disk assembly (page 2 - 9), bay two device (page
2 - 10), keyboard (page 2 - 11), shielding plate (page 2 - 12), CPU (page 2 - 13), palm rest (page 2 - 17), bottom
case (page 2 - 18) and LED board (above).
2. Remove screws - from the speakers (Figure 2 - 24a).
3. Carefully lift the speakers off the top case assembly (Figure 2 - 24b).
Figure 2 - 23
LED Board
Removal
Sequence
a. Remove the screws.
b. Lift the LED board
off the top case as-
sembly.
1 5
6
2
1
43
5
6
a.
b.

6. LED board
•5 Screws
Figure 2 - 24
Speakers
Removal
Sequence
a. Remove the screws.
b. Lift the speakers off
the top case assem-
bly.
1 4
5
2
1
4
3
5
5
a.
b.

5. Speakers
•4 Screws