User Guide

Disassembly
2 - 20 Removing the Audio "DJ" Module
2.Disassembly
Removing the Audio "DJ" Module
1. Remove the battery (page 2 - 7), bay one device (page 2 - 8), hard disk assembly (page 2 - 9), bay two device (page
2 - 10), keyboard (page 2 - 11), shielding plate (page 2 - 12), CPU (page 2 - 13), palm rest (page 2 - 17) and bottom
case (page 2 - 18).
2. When the top and bottom case assemblies are separated, the Audio "DJ" module will be visible.
3. Disconnect the microphone cable , the Audio "DJ" cable , then carefully remove the Audio "DJ" module
(Figure 2 - 16b).
4. Remove screws - from the back of the Audio "DJ" board in order to separate the board from the module
and power button (Figure 2 - 16c).
Figure 2 - 16
Audio "DJ"
Module Removal
Sequence
a. Disconnect the mi-
crophone and Audio
"DJ" cables.
b. Remove the mod-
ule.
c. Remove the 4
screws to separate
the board, module
and power button.
1 2 3
4 7 8
3 9
3
1
2
a. b.
c.
1
4
5
6
7
8
9

1. Microphone Cable
2. Audio "DJ" Cable
3. Audio "DJ" Module
8. Audio "DJ" Board
9. Power Button
•4 Screws