User Guide

Disassembly
2 - 12 Removing the System Memory
2.Disassembly
Removing the System Memory
1. Remove the keyboard (page 2 - 11).
2. Remove screws - (Figure 2 - 6a) from the shielding plate, and lift the plate up off the computer.
3. Locate the memory sockets and (Figure 2 - 6c), and gently pull latches and (Figure 2 - 6c) on the
memory socket toward the sides of the computer as indicated in Figure 2 - 6c.
4. The module (Figure 2 - 6d) will pop-up, and you can remove it.
5. Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot.
Figure 2 - 6
Memory Removal
Sequence
a. Remove the screws
from the shielding
plate.
b. Remove the shield-
ing plate.
c. Pull the latch(es) on
the memory sockets
to release the mod-
ule(s).
d. When the module
pops up, lift it out.

1. Shielding plate
10. Memory module(s)
•4 Screws
2 5 1
6 7 8 9
10
4
6
c.
d.
a.
2
7
8 9
8 9
3
b.
1
5
10

Contact Warning
Be careful not to touch
the metal pins on the
module’s connecting
edge. Even the clean-
est hands have oils
which can attract parti-
cles, and degrade the
module’s perform-
ance.