User Guide

Disassembly
Removing the Keyboard 2 - 11
2.Disassembly
Removing the Keyboard
1. Turn OFF the computer.
2. Press the two keyboard latches at the top of the keyboard as in Figure 2 - 5a (you may need to use a small screw-
driver to do this). The keyboard will then pop-up and can be lifted out of the computer
3. Carefully lift the keyboard up and out, being careful not to bend the keyboard ribbon cable (Figure 2 - 5b).
4. Disconnect the keyboard ribbon cable from the locking collar socket (Figure 2 - 5b).
Figure 2 - 5
Keyboard
Removal
Sequence
a. Press the two latch-
es to release the
keyboard.
b. Lift the keyboard out
and disconnect the
cable from the lock-
ing collar.
3
a.
Keyboard Tabs
1 2
3
c.
b.
4

Re-Inserting the Key-
board
When re-inserting the
keyboard firstly align
the five keyboard tabs
(Figure 2 - 5c) at the
bottom of the keyboard
with the slots in the
case.

4. Keyboard