User Guide

Disassembly
Removing the Hard Disk Drive Assembly 2 - 9
2.Disassembly
Removing the Hard Disk Drive Assembly
1. Turn the computer OFF and turn it over.
2. Remove the device in Bay One (see “Removing the Bay One Device” on page 2 - 8).
3. Remove screw (Figure 2 - 3a).
4. Slide the HDD assembly forward, then lift it up out of the computer.
5. Remove screws - (Figure 2 - 3e) from the assembly, and slide the hard disk out of the case .
.
Figure 2 - 3
Hard Disk
Removal
Sequence
a. Remove the HDD
assembly screw.
b. Slide the HDD as-
sembly in the direc-
tion of the arrow.
c. Lift the HDD assem-
bly up.
d. Lift the HDD assem-
bly out of the com-
puter.
e. Remove the screws
and separate the
HDD from the case.
1
2 5 7 6
a. b.
d.
1
2
5
3
4
6
7
c.
e.

6. HDD case
7. HDD
•5 Screws