Service manual



4 – 25

TABLE 4 – 8

POSSIBLE PC CARD PROBLEMS &

SOLUTIONS

PC Cards

PC CARD SOCKET MALFUNCTION

The faulty conditions the user might encounter when using the PC Card socket are listed below along with corre-

sponding solutions.

Possible faulty condition Solution

Failure to insert the card into the socket If the card cannot be inserted into the socket, check for

obstructions. If the system was reassembled, recheck if there is

anything wrong with the reassembly procedures, or send the

notebook to the nearest service center for repair.

Failure to read from an inserted card 1. Check if the card is properly inserted.

2. Check if the card is configured with appropriate drivers.

(For software installation, see the User's Manual.)

3. Check with the card vendor to see if the card is damaged.

4. If the card is still not readable, send the notebook to

the nearest service center for repair.

Data reading error (SRAM card) 1. Replace the SRAM card's battery if necessary.

2. Check with the card vendor to see if the card is damaged.

3. If the problem persists, send the notebook to the

nearest service center for repair.