Service manual

3
3 – 5
GENERAL DISASSEMBLY:
REMOVING THE KEYBOARD & HEAT PLATE
keyboard & heat plate
1. Use a flat-head screw-
driver to release the
keyboard catches at
points A ~ D.
2. Carefully slide and lift
the keyboard slightly
up and towards the
LCD. Use the flat-head
screwdriver to discon-
nect the keyboard
cable from the lock-
ing collar socket (E)
on the mainboard.
Set the keyboard aside
until re-assembly.
4. Disconnect the fan
cable at JFAN1 (F).
3. With a Phillips-head
screwdriver, remove
screws G ~ K.
Stop here if you only need to
replace /upgrade the CPU.
RELEASING THE KEYBOARD &
REMOVING THE HEAT PLATE
FIG. 3 – 1
þ
Tip
This procedure involves:
screws 5
connectors: 2
Heat Plate
E
G ~ K
F