Service manual

Disassembly

2 - 6 Removing the System Memory (RAM)

2.Disassembly

Removing the System Memory (RAM)

The computer has one memory socket for 200 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting

DDR3 1066/1333MHz Memory (real operation frequency of memory depends on FSB of processor). The main memory

can be expanded up to 2GB. The SO-DIMM modules supported are 1024MB, and 2048MB and DDRIII Modules. The

total memory size is automatically detected by the POST routine once you turn on your computer.

Note: Atom™ N2600 Processors Only Support Up to 2GB of Memory

Memory Upgrade Process

1. Turn off the computer, remove the battery (page 2 - 5).

2. Locate the component bay cover , and remove screw (Figure 2a

3. Carefully lift the component bay cover

up (Figure 2b).

Figure 2

RAM Module

Removal

a. Remove the screw.

b. Lift the bay cover

up.



Contact Warning

Be careful not to touch

the metal pins on the

module’s connecting

edge. Even the clean-

est hands have oils

which can attract parti-

cles, and degrade the

module’s perfor-

mance.



1. Component Bay Co-

ver

•1 Screw