User Manual

PAGE 1
x
PAGE 2
Device Add for Inclusion -Press the Net_Button 3 times within 1.5s, Green LED is Blinking 3 times within 1 second. -If Inclusion Process is successful, Green LED will turn off. Device Remove for Exclusion -Press the Net_Button 3 times within 1.5s. -If Exclusion Process is successful, Green LED is Blinking 6 times, then turn off. Device Remove for Exclusion -Press the Net_Button 3 times within 1.5s.
PAGE 3
6 times, then turn off. Device Factory Reset -Long press Net_Button at least 10 seconds in the product. -Device Reset Locally notification is Transmitted. -Please use this procedure only when the network primary controller is missing or otherwise inoperable. Association & Association Group Information - Lifeline between controller and the product - Supported command classes Battery Report, Multilevel Sensor Report, and Device Reset Locally notification.