Specifications

www.teachingtechnology.co.uk_23
A sound solution for
classroom installation
NuVo WA-40 in-wall amplifier system
There are a variety of solutions for providing audio into your
classrooms. Some schools opt for speakers down the side of the
interactive whiteboard, with a separate amplifier and microphone.
Others use a portable PA system, which allows them to easily
transport the unit from room to room as required.
NuVo equips classrooms and other environments with a simple-
to-use amplification option, which is designed for ample power
and crisp audio reproduction.
Maths and science might be complicated, but
educational tools shouldn’t be...
40 watt amplifier, perfect
for delivering audio to any
enclosed listening setting
Easy four-button control
from both amplifier
and optional IR remote
controller
Both hard-wired rear
source inputs and front-
end source inputs for
flexibility in using multiple
devices with the system
Speakers included for
a simple, all-inclusive
approach to classroom
amplification
The flexible 40 watt amplifier installs discreetly into the wall, and
features two hard-wired rear source inputs, as well as two
convenient front-access inputs for quick additions to the system.
You can operate the amplifier from where it is installed in the wall,
or enjoy equally easy, portable control with the system’s optional
IR remote controller. Small mountable speakers round out the
install, for an all-inclusive, answer to a classroom’s amplification
needs.
The disadvantage of this type of system is that you cannot remove
it from room to room. However, in-wall systems are low-cost and
beneficial where space is at a premium.
• 01754 769967 • [e-mail] • www.wedgwood-group.com
NuVo in-wall amplifier
system complements
interactive whiteboards
such as SMART
Boards, ensuring that
all pupils hear lessons
clearly.
IN-WALL AUDIO