CLEVER ear and forehead thermometer User’s Manual ver. 1.
CAUTIONS & WARNINGS ►As with any thermometer, proper technique is crucial to getting accurate temperature readings. Please read this manual thoroughly and carefully before using. ►Always store the thermometer in a cool and dry place: temperatures between -4ºF(-20ºC) and 122ºF(50ºC); relative humidity less than 95%. Avoid direct sunlight. ►Avoid dropping the thermometer from a height or strongly hitting it with a hard object. ►Do not touch the lens. ►Do not disassemble the thermometer.
RESTRICTIONS OF USE This thermometer is clinically proven to produce accurate temperature measurements. However, please be advised if you have the following situations: ►The accuracy cannot be ensured for a person who has deformity in the ear such that the thermometer probe cannot be properly inserted into the ear canal. ►The accuracy cannot be ensured when blood or drainage is found in the ear canal. ►Take temperature from the other ear if ear drops or medications have been placed in an ear.
INTRODUCTION Thank you for choosing Clever Ear& Forehead Thermometer. This innovative medical device leverages on advanced infrared (IR) technology to measure temperature instantly and accurately in two convenient ways: in the ear or on the forehead. An additional function is while resting on a table, an elegant clock displaying room temperature will be presented. Set-up with a color LCD backlight, Clever is an elegantly designed infrared thermometer meant for your family.
HIGHLIGHTED FEATURES ►Provide two body temperatures: ear or forehead. ►Fast and accurate: meet the accuracy requirement specified in ASTM E1965-98. ►Non-contact measurement that is no lens filter required, thus saving cost of replacement. ►Clock and room temperature inter-display. ►A splash-proof probe that can be wiped using a clean cloth slightly damped with alcohol or water. ►Automatically power down or back to the CLOCK/ RT mode if left unused over 30 seconds.
M Clever Ear & Forehead Thermometer
Lens
SET TIME & UNIT You will need t o set time and unit for first-time use or after replacing the battery. Set button Step1 Press the Set Button. " " and the flashing hour appear first. Step2 Set hour&minute Press the On/Scan button to select the ““ correct hour. “ Press the Set button and t he f lashing minute then appears. Press the On/Scan button to select the correct minute. “ Step3 Select °F or °C Press the On/Scan button and °F/°C is displayed next. Press the On/Scan button to select.
NOTE Although the meter works when " " appears, we still recommend that you change the battery to obtain an accurate result.
The body temperature can vary with the individual. It also varies at different parts of the body and different time of the day. The following table1 shows the statistical normal ranges from different sites. Please keep in mind that temperatures measured from different sites, even at the same time, should not be directly compared. Fever means that the body temperature is higher than normal. This symptom may be potentially caused by infection, overdressing or immunization.
M M M NOTE The meter does not require any costly lens filters. The meter will automatically return to its initial mode (OFF or CLOCK/RT) if left without use over 30 seconds.
Ear Temperature Taking Hints 1. As with any type of thermometer, you may observe slight variations in consecutive measurements. It is recommended that you take 3 temperature readings and use the highest one for the following situations: Infants not more than 3 months old. Children not more than 3 years old and have a compromised immune system and the presence/ absence of fever is critical. When you are learning to use the thermometer. 2.
M Step2 Press and hold the On/Scan button. Put the probe on the temple. Make sure the probe is flat on the temple, not at an angle. Flat NOTE As the forehead temperature is likely to be affected by sweat, oil and t he surroundings, the reading shall be taken as a reference only. If the probe is placed at an angle on the forehead, the reading will be affected by surrounding temperature. You can scan at 3 cm distance from the forehead.
15
TURN OFF THE DEVICE After measurements, the meter will back to its initial mode after unused over 30 seconds. That is, if the meter is started from the OFF mode, it will be automatically off after measurements. Likewise, if the meter is started from the CLOCK/RT mode, it will be back to that mode after measurements. To exit the CLOCK/RT mode, you have to turn off the thermometer. To turn the thermometer off, press the Set button until the hour or minute is blinking.
RECALL THE MEMORY Your thermometer stores 20 recent readings in the memory. Be sure the thermometer is in either "OFF" or "CLOCK/RT" mode before recall. Step1 Press the M button to enter the memory. Step2 Press the M button to review the result. Each time you press the M button, a result will be displayed in the order of dates (latest result shown first together with M and number ( from 0 to 19). When the memory is full, the oldest result is deleted as the new one added.
CARE & CLEANING Keep the probe clean, as build-up of ear wax and grease may affect the measurement. The probe is splash-proof and can be wiped by a clean cloth damped with water or alcohol. The body of the thermometer is not water-resistant. Please never put the thermometer under a running tap or submerge it into water. Use a soft and dry cloth to clean it. Do not use abrasive cleaners. Store the thermometer in a cool and dry location. Please be free from dust and away from direct sunlight.
Message What it means When the measurement is below 100.4°F(38°C), is shown together with the result. When the measurement is equal or over 100.4°F(38°C) , Hi is shown together with the result. Message What it means Room temperature falls outside the operating range. What to do Put the thermometer under operating temperature range of 41°F to 104°F (5°C to 40°C) at least for 20 minutes. Battery is low and " is shown on LCD. Please change to a new battery as soon as possible.
SPECIFICATIONS Dimensions 105mm(L) x 32mm(W) x 35mm(H) Weight 45g Displayed temperature range 2°F to 122°F (0°C to 50°C) Display resolution 0.1°F /0.1°C Meet the accuracy requirement specified in ASTM E1965-98 Accuracy Temperature unit ±0.4°F (±0.2°C) for the range of 96.8°F to 102.2°F (36.0°C to 39.0°C) ±0.5°F(±0.3°C) from 34 to 35.9°C and from 39.1 to 42.
WARRANTY 1.Simple Diagnostics warrants this product to be free of defects in workmanship and materials for a period on TWO years from the date of purchase. 2.During the warranty period, if this product is found to be defective, you may bring it together with the purchase receipt and Warranty Certificate on a carry-in basis to Simple Diagnostics’s office during normal business hours for warranty service.
NOTES
NOTES
