Installation manual

27
f. Set Date
1) Start Setup Procedure (Above).
2) Select Date
with the Selector Dial
6019002_00
D
.
3) Confirm with Smart Key
.
4) Select date format desired with the Selector Dial
6019002_00
D
.
5) Use the Paging / Scrolling keys
to switch between day, month, and year.
6) Set the date with the Selector Dial
6019002_00
D
.
7) Confirm with Smart Key
.
g. Select Temperature in C or F
1) Start Setup Procedure (Above).
2) Select
with the Selector Dial
6019002_00
D
.
3) Confirm with Smart Key
.
4) Use the Selector Dial
6019002_00
D
to select C or F.
5) Confirm with Smart Key
.
h. Network Address
1) (Required for use of PC Control, PC-HACCP, and Convotherm Service System.)
2) Start Setup Procedure (Above).
3) Use the Selector Dial
6019002_00
D
to select the Network Address (three computers icon).
4) Confirm with Smart Key
.
5) The current address will be displayed.
6) Use the Selector Dial
6019002_00
D
to select the desired network address (1-99).
7) Confirm with Smart Key
.
i.
Program Protection
1) Compatible, connected energy optimization equipment is required to use this option.
2) Connecting the unit to an energy optimization unit during power peaks in the
kitchen can cause the energy supply from the optimization unit to be interrupted
during critical phases.
3) The program protection function automatically prevents program in progress from
being interrupted.
a) Use the energy optimization lock if cooking time is crucial to the quality of a dish,
including sensitive foods, short cooking times, or the regeneration of plates.
b) Individual steps in a recipe can be protected by the program protection function. The
energy optimization can be set so that the energy optimization unit will not intervene
during a critical phase but may during a less sensitive cooking step.
4) The energy optimization unit has no access to the Combi. Instead, it accesses
other connected devices.
5) To set Program Protection
a) Press Smart Key
.
b) Various options will appear in the display.
c) Use the Selector Dial
6019002_00
D
to select Program Protection
.