Installation manual

26
8. SET CONTROL PANEL OPTIONS.
a. Start Setup Procedure
1) Press Smart Key
.
2) Use the Selector Dial
6019002_00
D
to select Setup
.
3) Confirm: Press Smart Key,
.
4) Answer “Yes” with Smart Key
.
b. Set Language
1) Start Setup Procedure (Above).
2) Select Language
.
3) Confirm with Smart Key
.
4) Select desired language with the Selector Dial
6019002_00
D
.
5) Confirm with Smart Key
.
c. Set Signal Tone
1) Start Setup Procedure (Above).
2) Select Signal Tone
with the Selector Dial
6019002_00
D
.
3) Confirm with Smart Key
.
4) Display will show available signal tones.
5) Select a signal tone with the Selector Dial
6019002_00
D
.
6) Pausing on a tone icon will cause it to sound.
7) Select a signal tone by pausing on it.
8) Confirm with Smart Key
.
d. Set Volume
1) Start Setup Procedure (Above).
2) Select Volume
(speaker and slider icon) with the Selector Dial
6019002_00
D
.
3) Confirm with Smart Key
.
4) Display will show volume options and an alert tone will sound.
5) Set Volume
with the Selector Dial
6019002_00
D
.
6) Confirm with Smart Key
.
e. Set Time
1) Start Setup Procedure (Above).
2) Select Time
(clock icon) with the Selector Dial
6019002_00
D
.
3) Confirm with Smart Key
.
4) Select time format desired with the Selector Dial
6019002_00
D
.
5) Use the Paging / Scrolling keys
(Left and Right Arrows) to switch between
hours and minutes.
6) Set the time with the Selector Dial
6019002_00
D
.
7) Confirm with Smart Key
.