Owner manual

MAN-70254REV. AA ULTRA SERIES UNDER PILLOW BLOCK TRANSDUCER
PAGE 5 OF 18
1 IMPORTANT INFORMATION
1.1 ORDER NUMBERS
Use the following example and Tables A to determine order numbers for:
• Ultra Series Under Pillow Block Transducers
• With or without mounting Plate
Figure 1 – Example for Determining Transducer Order Numbers
If you needed to Purchase a Transducer corresponding to
following description:
Then, you would use Catalog Numbers:
• Size 1 Under Pillow Block Transducer.
• With Blank mounting plate.
• Maximum Working Force (MWF) of 100 lbs.
Ultra Series Transducer = M846-13523-100 (Refer to
Table A)
Having the following information at hand will help you to easily determine which of the Ultra Series Under Pillow
Block Transducers is right for your application:
• The size of the pillow block bearing used
• Pillow block mounting plate requirements
• Maximum working force
Use Table A to determine the catalog number for the proper Under Pillow Block Transducer.
Table A – Determining a Catalog Number for the Ultra Under Pillow Block Transducer with Stainless Steel mounting plate.
Order Code Suffix, M.W.F.
Size Base Part Number
-000 -100 -200 -300 -400 -500
UPB1 M846-13523 25 lb. 50 lb. 100 lb. 250 lb. 500 lb. 1000 lb.
UPB2 M846-13510 1000 lb. 2500 lb. 5000 lb. 10000 lb. 20000 lb.
For units without the blank Stainless Steel mounting plate, change the last digit of the ending suffix from a zero “0”
to a “1”. Example: use M846-13523-001 instead of M846-13523-000
1.2 CONTACT INFORMATION AND SERVICE ASSISTANCE
For service assistance, have the following information available:
• Type of Transducer you are using
• Maximum working force
• Purchase order number
You can contact Cleveland Motion Controls at:
Phone:
216.524.8800
Fax:
216.642.5155
For the latest product information, technical literature etc., visit our website at www.cmccontrols.com