Installation Instructions

97
8.1 Water connection on the iBox
Exit 1: Head shower
If an iBox is present in the chosen configuration, the hot and cold water connection from the iBox will be routed to
the generator. If this is not the case, the cold water hose will be connected to the generator.
The supplied hoses must be connected to the correct wall connection.
Check and mark the function of your wall connection: hot or cold!
The cold water connection, marked in blue, must be mounted on the cold water wall connection.
The hot water connection marked in red must be mounted on the hot water wall connection.
All other connections for hand and / or head shower are already mounted. To provide simple service to the
generator, a stop valve has been placed between the generator and the water supply.
After the BackWall has been finished, the color parts can be mounted on the iBox. Follow the instructions that
are included in the box with color parts. The iBox is a system that fits a number of different color parts. Check in
advance whether the correct color parts are included.
Exit 2: Connection cold water
Exit 3: Connection to the hand
shower
Exit 4: Connection warm
water