Installation Instructions
83
1 Introduction
These instructions are intented for the installer. Read these instructions carefully to get to know the product, the
parts and the installation method. The BackWall must be installed by qualified and well-trained personnel.
The BackWall complies with the applicable standards and regulations and does not pose any direct danger for
the user if the BackWall is installed according to the manufacturer’s instructions and is used in accordance with
this manual. The electronic and mechanical parts must be carefully maintained so that the BackWall remains fully
operational. For this reason, the instructions must be followed closely.
All information and instructions in this manual have been compiled in accordance to the applicable standards and
regulations, the current technique and our years of experience and findings. National and local regulations must
be followed.
Check the product for possible transport damage. After the installation, a claim for (surface) damage will not be
accepted by Cleopatra.
Every right to warranty expires if adjustments have been made to the original product or parts. This manual must
be kept close to the product for quick access if needed.
Use screws and plugs to mount the BackWall on the wall. Walls that support the BackWall must be strong enough
to carry the weight; otherwise they need to be strengthened. The supplied plugs and screws are intended for use
on concrete or solid stone walls. If the walls are made of a different material than concrete or solid stones, use
material that is suitable for that specific wall. (not included in delivery).
Cleopatra accepts no liability for damage caused by:
- Failure to follow the manual.
- Wrong use.
- Installation by unqualified personnel.
- Unauthorized changes to the product.
- Technical changes.
- The use of non-original spare parts.
Correct use:
- The BackWall may only be used indoors.
- Use in another way is not permitted and is for the user’s own risk.
- Do not use the BackWall when it is not in perfect condition.
- Do not use this product in an environment where it is exposed to corrosion.
Pay attention: General danger
Important instruction or description