Installation Instructions

139
1
Keep around the recesses for the service
access and the steam inlet has a clearance
of 3 mm. This space is sealed with kit.
32 Tile
Tile the entire space. Keep a recess of at least 3mm around the service
access.
In the following pages it is explained how the recesses in the tiles are
made for the sensors, operation, fragrance and steam inlet.
33 Installing sensors
Measure and mark these distances on the tile.
1
Drill a hole in the tile twice with Ø 20
mm drill and place it in the wall.
2
Ø20 mm
100 mm
Ø20 mm
32 mm
35 mm
All distances serve as an example