Instructions

 
 Beacon Tokens (1 red, 1 yellow,
1 green) – Each Beacon contains a
resistor to limit the current ow and an
LED (Light Emitting Diode) that lights
up when current ows through it in the
proper direction.
 Switch Token – This token causes the metal strip
pathway to turn 90 degrees to the right, to go
straight, or to turn 90 degrees to the left, depending
on how you set the switch.
 Straight Tokens – These carry the metal strip
straight across the token from one side to the other.
 Corner Tokens – These carry the metal strip 90
degrees around a corner.
 T Tokens – These split the metal strip into
two pathways.
 Bridge Token – This houses two metal strips that
connect pathways across the token, east-west and
north-south, without them touching each other.
 Double-Corner Token – This carries two metal
strips, each strip comes in and goes out at a 90
degree angle.
 Blocker Token – This prevents other tokens from
being placed in a given grid square.
90° Left
90° Right
Straight
OBJECT:
For each challenge, build a continuous metal strip pathway from Start
to Finish that lights up the designated Beacons on your Challenge Card.
THE BEACONS:
Begin each challenge by identifying
which Beacons you will use,
and whether the Challenge Card
designates them to be lit or to stay
dark. Every challenge will include
at least one illuminated Beacon.
Designated Beacons
Sample Congurations
One lit Beacon Two lit Beacons Two lit Beacons,
one dark Beacon
CHALLENGE:
™
BEGINNER
ADD TO GRID:
x2
CHALLENGE:
™
BEGINNER
ADD TO GRID:
x2
NOT INCLUDED: 3 AAA batteries. These must be loaded into the
Battery Housing in the START Token (+). (see page 15)
Solved Challenge