Instruction manual
5049
Step 3.
Position the lap belt underneath the Armrest
on the side opposite the vehicle seat belt
buckle, as shown in Figure 58.
Step 4.
Pull the lap and shoulder belt over the
child while positioning BOTH the lap and
shoulder belt underneath the Armrest on
the vehicle seat belt buckle side, as shown
in Figure 59. Buckle the seat belt.
Figure 59
Figure 58
Step 5.
Pull on the shoulder belt to remove all slack out of the lap
and shoulder belt and snugly adjust the vehicle seat belt
onto the child.
IMPORTANT: Design and operation of vehicle seat belt
systems vary from vehicle to vehicle and from seating
location to seating location within the same vehicle. Refer
to your vehicle owner’s manual for proper use, placement
and adjustment of the vehicle’s lap and shoulder belts.
Step 6.
Check vehicle seat belt fit on the child:
t7FIJDMFTFBUCFMUT.645mUTOVHMZBOEMBZnBUBHBJOTU
the child and MUST not be loose or twisted. A snug seat
belt does not allow any slack. It lies in a relatively straight
line without sagging.
t5IFMBQCFMU.645TJUMPXBOETOVHMZPOUIFDIJMETIJQT
Pull on the shoulder belt to tighten.
t8IFOTJUUJOHPOUIJTCPPTUFSTFBUUIFTIPVMEFSCFMU
MUST lie snugly across the mid point of the child’s chest
and across the center of the shoulder in the GREEN
zone, as shown in Figure 60.
Figure 60