Instruction manual

2019

WARNING

t%0/0564&5)&-"5$)$0//&$5034504&$63&5)*4#0045&34&"550

THE VEHICLE’S LATCH ANCHORAGE SYSTEM IF THE SEAT BELT OR SEAT BELT

#6$,-&*4/05&"4*-:"$$&44*#-&8*5)5)*4#0045&34&"5-"5$)&%*/

1-"$&03*'5)&7&)*$-&4&"5#&-5#6$,-&*4-0$"5&%*/#&58&&/5)&

LATCH ANCHORS, AS SHOWN IN FIGURE 12. OR IF THE VEHICLE SEAT BELT

IS LOCATED IN BETWEEN THE LATCH ANCHORS, AS SHOWN IN FIGURE 13.

Figure 12 Figure 13

To connect to lower anchors, pull and hold

Recline Handle on front of booster Seat

Base

and pull LATCH Connectors out

, as shown in Figure 14. Release

Recline Handle.

Step 2.

Place booster in the seating location

selected with the LATCH Connectors

facing the vehicle seat.

Secure the LATCH Connectors to the

vehicle LATCH lower anchors by aligning

the LATCH Connectors with the vehicle

LATCH anchors and pressing the LATCH

Connectors against the LATCH lower

anchors until you hear each LATCH

Connector click, as shown in Figure 15.

Figure 15

Figure 14