Instruction manual

77
78
Figure 106
Step 3
Attach desired loops at end of Shoulder
Harness Straps to Metal Harness Plate by
sliding strap into slot in plate as shown in
Figure 106.
TO LENGTHEN THE SHOULDER HARNESS
WEBBING
For larger children: to make the
Harness larger, attach the Metal
Harness Plate to a loop closer to the end
of the Shoulder Harness Strap as shown
in Figure 107.
TO SHORTEN THE LENGTH OF THE
SHOULDER HARNESS WEBBING
For smaller children: to make the
Harness smaller, attach the Metal
Harness Plate to a loop further in from
the end of the Shoulder Harness Strap
as shown in Figure 108.
Figure 107
Figure 108
Figure 110
Check that both Shoulder Harness Straps are
attached to the Metal Harness Plate on the
same loop while ensuring that each Shoulder
Harness Strap is completely inside the slot in
metal Harness Plate as shown in Figure 109.
Step 4
Reattach Shoulder Harness Access Panel to
back of car seat:
• Insert the access panel and twist the
access panel lock clockwise as shown in
Figure 110.
Figure 109