Instruction manual

75
76
Figure 101
Step 4
Remove loops at ends of Shoulder Harness
Straps from Metal Harness Plate by sliding
strap out through slot in Metal Harness Plate
as shown in Figure 101.
Step 5
From front of car seat, pull Shoulder Harness
Straps out of seat back.
Shoulder Harness
Slot Adjustment
For Rear-Facing Use: Insert the Shoulder
Harness Straps through the Shoulder Harness
Slots at or just below and closest to the
shoulders of your child as shown in Figure
102.
For Forward-Facing Use: Insert the Shoulder
Harness Straps through the Shoulder Harness
Slots at or just above and closest to the
shoulders of your child as shown in Figure
103.
Figure 103
Figure 102
Figure 104
Shoulder Harness Rethreading
Step 1
Check that Harness Straps are not twisted
and from front of seat, insert Shoulder
Harness Straps through the desired Shoulder
Harness Slots as shown in Figure 104. Straps
MUST go through the Shoulder Harness Slots
at the same height on each side
Step 2
Route Shoulder Harness under bottom of seat
back cover (1) as shown in Figure 105.
1
Figure 105