Instruction manual

69
70
Step 7
Buckle Harness:
• Insert Buckle Tongues into Buckle one
at a time as shown in Figure 87. You
should hear a click.
• Pull up on tongues to check that they are
securely locked.
Step 8
Pull Harness Adjuster Strap to snugly adjust
Harness Straps as shown in Figure 88.
• Check that Harness Straps are snug on
shoulder and thighs.
• A snug Harness should not allow any
slack. It lies in a relatively straight line
without sagging. It does not press on the
child’s flesh or push the child’s body into
an unnatural position.
NOTE: If Harness cannot be snugly adjusted
as described above, see step 3 of “Shoulder
Harness Rethreading” on page 77 to make
the harness smaller.
Step 9
Close Chest Clip and position Chest Clip at
arm pit level as shown in Figure 89.
Figure 87
Figure 88
Figure 89
Removing Your Child
from Car Seat
Step 1
Separate Chest Clip by squeezing release
tabs together (1) and pulling Chest Clip apart
(2) as shown in Figure 90.
Step 2
Unbuckle Harness by pressing red release
button on Buckle as shown in Figure 91.
Step 3
Loosen the Harness and remove child’s arms
from Harness and remove them from car
seat.
NOTE: To keep the Harness out of the way
for easier placement or removal of your
child, place the Buckle Tongues between the
fabric and the plastic panel on the exterior of
the child seat.
2 2
1
1
Figure 90
Figure 91