Instruction manual

59
60
Step 4
Adjust car seat to the desired Forward-Facing
recline position by pulling Recline Handle out
and rotating car seat as shown in Figure 66.
NOTE: Recline positions 1 and 2 can be used
Forward-Facing. Recline position 2 CANNOT
be used without a Top Tether Forward-
Facing. Recline Position 3 can NEVER be
used Forward-Facing.
Step 5
Remove Tether Hook from its storage location
on back of car seat. See “Top Tether
Storage“ on page 90.
• Lengthen Top Tether belt by pressing
adjuster release button while pulling
strap as shown in Figure 67.
• Place Top Tether Hook in the seat of the
car seat.
Figure 66
Figure 67
Step 6
Place car seat Forward-Facing in the vehicle
seat location selected with Forward-Facing
belt path toward vehicle seat back and
centered in seating position as shown in
Figure 68.
Step 7
Route vehicle belt through the Forward-
Facing Belt Path, taking care not to put
vehicle belt between Harness and back
of seat, and buckle seat belt, as shown in
Figure 69.
Step 8
If installing with a lap/shoulder belt, open
the Forward-Facing Belt Lock-off on the
same side of the seat as the vehicle shoulder
belt anchor point as shown in Figure 70.
Place the vehicle shoulder belt through the
Forward-Facing Belt Lock-off as shown in
Figure 70a.
Figure 68
Figure 69
Figure 70
Figure 70a