Instruction manual

21
22
Figure 11
Vehicle Belt Systems
• NEVER use a passive restraint — lap or shoulder belt
mounted on door, as shown in Figure 10.
• NEVER use a passive restraint — lap belt with a motorized
shoulder belt, as shown in Figure 11.
• NEVER use an inflatable vehicle belt.
– Check the belt for labels and refer to your vehicle
owner’s manual.
• Buckle/Lap Belt Anchor Forward of Seat Bight – lap belt or
lap belt portion of a lap/shoulder belt or buckle comes out
of vehicle seat bottom forward of the seat back, as shown
in Figure 12.
– May not allow for secure installation of this car seat
in some cases. Check for movement of car seat after
installation. If car seat is not secure, DO NOT use this
vehicle belt.
Figure 10
Figure 12
Figure 13
Figure 14a
Figure 14
• Retractable Lap Belts – Lap belt is mounted on a retractor
which automatically pulls the lap belt back in when
released, as shown in Figure 13.
– If this type of lap belt is equipped with an Emergency
Locking Retractor (ELR) it should NEVER be used with this
car seat.
– If this type of lap belt is equipped with an Automatic
Locking Retractor (ALR), or a Switchable Locking
Retractor (SLR), it can be used. See your vehicle owner’s
manual for more information on SLR retractor belts. To
check if your retractable lap belt is equipped with an
ALR retractor:
1. Pull the belt all the way out until is stops.
2. Allow the belt to pull back in about 6 in. (15 cm).
3. Pull out on belt again. If the belt will not pull out
again, it is equipped with an ALR retractor.
• Manually Adjustable Lap Belts, see Figure 14 – Length can
be manually adjusted. Does not retract into the vehicle.
– Most manually adjustable lap belts will allow for secure
installation, but if the locking latch plate slides, not
providing a secure installation, it may be necessary
to flip the locking latch plate over to get a secure
installation as shown in Figure 14a.