Instruction manual

88
89
88
TO INSTALL SEAT CUSHION COVER
Step 1
Place Seat Cushion Cover on a at surface
with Seat Cushion Cover attachments facing
up, as shown in Figure 132.
Step 2
Place Seat Cushion onto Seat Cushion Cover,
aligning the Seat Cushion with the Seat
Cushion Cover attachments.
Step 3
Reattach Seat Cushion Cover attachments to
Seat Cushion by wrapping the Seat Cushion
Cover sides around the entire Seat Cushion,
as shown in Figure 133.
SEAT BACK COVER REMOVAL/
INSTALLATION
Removal of the seat back cover is not
recommended unless necessary due to
heavy soiling which cannot be removed by
surface washing. For instructions on removal
and installation of the seat back cover go to
http://www.clekinc.com/support/lo
Figure 132
Figure 133
Car Seat Cleaning
FABRIC CARE INSTRUCTIONS
Step 1
If the spot has dried, try lightly brushing or scraping off the
residue. Wipe surface with water.
Step 2
If a spot still remains, apply a mild detergent to fabric with a
light mist.
Step 3
Work area using soft brush or edge of spoon from outside of
spot towards the middle.
Step 4
Allow solution to work for approximately one minute.
Step 5
Remove with clean water or blot with clean soft towel.
Step 6
Repeat steps 3-5 as necessary until spot is removed.