Instruction manual

66
67
Step 5
Place car seat Forward-Facing in the vehicle
seat location selected, and route vehicle belt
through the Forward-Facing Belt Path. Take
care not to put vehicle belt between Harness
and back of seat, and buckle seat belt, as
shown in Figure 87.
• Check that seatbelt is contained in both
red Forward-Facing Belt Guides as
shown in Figure 93 and not between
the Harness and the seat.
Step 6
If installing with a lap/shoulder belt, open
the Forward-Facing Belt Lock-off on the
same side of the seat as the vehicle shoulder
belt anchor point as shown in Figure 88.
Place the vehicle shoulder belt through the
Forward-Facing Belt Lock-off as shown in
Figure 88a.
Figure 87
Figure 88
Figure 88a
Step 7
Center car seat in the vehicle seating position
chosen, and tighten vehicle seat belt to
secure the car seat.
• Press down in center of car seat to
depress the vehicle cushion and pull
end lap belt only or shoulder portion of
lap/shoulder belt to tighten as shown in
Figure 89 (lap belt only) or Figure 90
(lap/shoulder belt).
• If using a lap/shoulder belt: while
holding the vehicle belt tight, lock
Forward-Facing Belt Lock-off as shown
in Figure 91.
NOTE: Use only one Shoulder Belt Lock-Off
at a time. Never use both in the Forward-
Facing Mode.
Step 8
Check that the entire belt is laying at,
placed correctly through the Forward-Facing
Belt Guides and NOT between the Harness
and seat, as shown in Figure 92 (lap belt
only) and Figure 93 (lap/shoulder belt.)
Figure 89
Figure 91
Figure 90
Figure 92 Figure 93
Figure 92 Figure 93