Owner's Manual

1. Bluetooth pairing
t 00:05 > -t) ..
NFC
1. FLOW II is OFF. Press the power button
for 2 seconds
to turn on your FLOW II
2. Turn on NFC on your device and place
it near the right ear cup
3. FLOW II is now paired
'For NFC enabled devices only
Or
Pairing Mode
1. FLOW II is OFF. Press the power button
until the
LED blinks white and red
2. Select "Cleer FLOW II" on the Bluetooth
device list
3. FLOW
II is now paired
4
2. Bluetooth music control
◄ ~ Volume+
◄ > Volume-
Press ••
twice
x2
Play/Pause
Next
track
3. Bluetooth call control
Press ••
twice
x2
Press -
and
hold
Cancel the call (outgoing call)
Answer the call (incoming call)
Hang up the call (call
is active)
On-hold for
1st call and answer 2nd
call (2nd incoming call ringing)
Hang up the current active call and
switch
to another call (both 1st call
and 2nd call are active)
Reject the call
Reject the 2nd incoming call
(for 2nd incoming call ringing)
Switch between
1st call and 2nd call
(both
1st call and 2nd call are active)
5
Previous
track
•rouch control are only
active when FLOW II Is
powered ON
*"'Calls can be answered by
pressing the left ear cup as
shown when powered ON. If
wired for passive llstenlng
and powered OFF, calls
have to be answered on the
phone, but communication
can be done via FLOW II