Owner's Manual

4. Line-in connection
5. Charging
You can connect your ENDURO 100 to your audio
device with the provided USB-C
to 3.5mm cable
Hi-Res
output is only available thru line-in connection
• Cleer
USB-C to 3.5mm audio cable is for
ENDURO 100 use only
6
Connect ENDURO 100 to a power
source with the provided USB-C
cable
A 10-minute charge will give
12
hours of playtime. ENDURO 100
can be fully charged in 3 hours
6. LED Behavior
IT)
c::::::::>
c::::::::>
000000
0 0 0
o• o• o•
••••••
• • •
•• ••
• • •
LED OFF
Power on
Power
off
Power on but not connected with any device
Power on and connected with a device
Pairing mode
Battery low when
not connected with any device
Battery low when connected with device
Charging (battery level 0-49%)
Charging (battery level 50-99%)
Battery fully charged
7. Specifications
Driver:
Audio CODEC support:
Frequency response range:
Connections:
Support:
Charging:
Bluetooth transmission
frequency range:
Bluetooth transmission power:
Battery:
Playback
time (BT):
Weight:
40mm lronless" Driver
SBC , AAC, aptx HD
20-40KHz (Line in)/ 20-20KHz (Bluetooth)
USB-C
to 3.5mm for audio, USB-C to USB-A for
charging
BT 5.0, SPP v1.0 , HFP v1.6 , A2DP v1.3.1, AVRCP v1 .6
A 10-minute charge will give
12 hours of playtime.
ENDURO 100 can be fully charged
in 3 hours
2.402-2.480GHz
<4dBm
Rechargeable lithium ion rectangle cell
(3 . 7V)
Up to 100 hours
280g
7