Owner's Manual

54
Bluetooth
Cleer ALLY PLUS
Bluetooth Bluetooth
ON
Cleer ALLY PLUS
Bluetooth
PAIR
Volume
+
Volume -
RL
/
RL
/
1. Bluetooth pairing
Pairing Mode
1. Remove both earbuds from the
charging case
2. Press the touch pad on either earbuds
3 times, on the third press hold for 2s
3. Select your “Cleer ALLY PLUS” on the
Bluetooth device list to pair the first
earbud
4. After a few seconds, a Bluetooth
pairing request pop-up window will
appear, press “PAIR” to connect the
second earbud
5. ALLY PLUS is now paired
*To clear the pairing record of your ALLY PLUS:
1. Remove both earbuds from the charging case 2. Put
both earbuds into pairing mode 3. Press and hold the
touch pad until the LEDs on the earbuds flash red 3
times 4. Return the earbuds to the charging case and
leave them there for 10 seconds 5. The pairing record
is now cleared
ALLY PLUS
USER MANUAL
3. Noise Cancellation Mode and Ambient Mode
Press
once
x1
Cycle thru Noise Cancellation
Mode ON, Ambient Mode ON
and ALL OFF
ALLY PLUS
USER MANUAL
Noise Cancellation Mode: Our noise canceling
technology and optimized passive isolation can
suppress wide-band ambient noise
Ambient Mode: Allows you to hear sounds
around you even while wearing your ALLY PLUS
*ALLY PLUS is set to Noise Cancellation
Mode when powered ON
x3 00:02
>
2. Volume control