User Manual Chapter 1
Chapter 1 - 4
• 9714-0020 Power Supply. The power supply (see Figure 1-4) uses 95 to 250 VAC, 47 to 63 Hz power to provide
+5V and ±12V DC power to the IDU.
Figure 1-4. 9714-0020 Power Supply
• 9714-2900 Outdoor Unit (ODU). The ODU (see Figure 1-5) contains the receiver front end and the final stage of
transmit power amplification. Power, signal and control all flow through a single thin coax cable to allow remote
ODU location without a separate power source. The ODU is included as part of the antenna assembly. Connector
J1 is used for connection to the IDU by coax cable. Connector J2 is permanently attached to the antenna port by
coax cable.
Figure 1-5. 9714-2900 ODU